Raoyang Hongyuan Machinery Co., Ltd.

ordinary type dry powder filling machine
b , ordinary type dry powder filling machine
b , type dry powder filling machine is a new product designed and developed by our factory based on the advantages of domestic and foreign powder filling machines. The machine adopts vacuum jet technology to quickly suck the dry powder into the powder storage cylinder, and then fill it into the cylinder to be filled. It can also work while sucking in and filling at the same time. This machine is small in size, easy to move, simple to operate, and has no pollution to the environment. advantage. This reduces labor intensity and improves the working environment. It is especially suitable for the filling, production and maintenance of dry powder fire extinguishers, and is also suitable for the filling of various powder products. It is an ideal product in the powder filling industry.
, >Technical parameters
, Volume: m
, Weight
, Voltage: or
, Power:.
, Filling speed: /< br/> , Filling accuracy:
, This filling machine has two filling methods
,> Filling methods
, The first filling method:
> Check whether the hose connection is loose.
, , turn on the power.
, The machine should be connected to the ground wire when trying it out. After the power is turned on, test the machine to check whether the rotation of the air pump is consistent with the required rotation.
, filling containers with different capacities can be done according to the height and caliber of the cylinder (equipped with interfaces of different calibers),
, align the rubber sealing ring on the lower end of the interface with the mouth of the cylinder for sealing good.
, When working, open the valve at the bottom of the cylinder (picture).
, and use the subtractive weighing method to measure, put the powder source on the scale, weigh the total weight, and then set the scale at
, the known total weighing weight to be filled = should A certain weighing position
, this measurement method is the subtraction weighing method.
, turn on the start switch, and the pump starts to work. At this time, put the powder suction pipe into the powder source, and the powder will be sucked into the powder storage cylinder through the pipe. When the weighing is close to the fixed value,
, you can Appropriately reduce the amount of powder suction through the powder suction tube. Once the set weighing is reached, take out the powder suction tube, insert the powder suction tube into the tube holder and put it away.
, Push the reversing valve push rod several times to clean the powder remaining in the powder storage cylinder.
, close the valve, shake up the powder storage cylinder, remove the fire extinguisher to be filled, and the filling is completed.
, When the accuracy of filling and measurement is high, the filled container can be rescaled and corrected.
, The second filling method
, Check whether the hose connection is loose.
, , turn on the power.
, The machine should be connected to the ground wire when trying it out. After the power is turned on, test the machine and check whether the rotation of the air pump is consistent with the required direction.
, Remove the powder suction pipe of the dry powder filling machine, and connect the suction pipe next to the powder suction end cover with the powder suction port of the powder storage cylinder.
, Place the cylinder to be filled on the electronic weighing platform, cover the filling end cap on the cylinder to be filled, press the tare key, and the weighing platform will return to its original position.
, turn on the start switch, and the pump starts to work. At this time, the powder source is put into the suction pipe, and the powder is sucked into the cylinder through the pipe. When the weighing is close to the fixed value,
, the powder can be sucked through The tube should appropriately reduce the amount of powder sucked. Once the set weighing is reached, take out the straw and the filling will be completed.
b ' H' ! h hh